Commands Listed in Alphabetical Order
Arguments ON or 1 enables grouping of IEC harmonics.
OFF or 0 disables grouping of IEC harmonics.
Examples POWER:HARMONICS:IEC:GROUPING OFF disables grouping of IEC harmonics.
POWER:HARMONICS:IEC:GROUPING? might return
:POWER:HARMONICS:IEC:GROUPING 1 indicating that the grouping is enabled
for IEC harmonics.
POWer:HARMonics:IEC:INPUTPOWer
Sets or returns the class D rated input power for IEC harmonics.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:IEC:INPUTPOWer <NR3>
POWer:HARMonics:IEC:INPUTPOWer?
Arguments <NR3> is the class D input power. Valid values ranges from 0 to 600 in
increments of 10. The unit of measure is watt.
Examples POWER:HARMONICS:IEC:INPUTPOWER 600 sets the class D input power to
600 W.
POWER:HARMONICS:IEC:INPUTPOWER? might return
:POWER:HARMONICS:IEC:INPUTPOWER 100 indicating that the class D input
power is set to 100 W.
POWer:HARMonics:IEC:LINEFREQuency
Sets or returns the line frequency for the IEC standard.
Conditions This command requires a DPO4PWR application module.
Group Power
2-254 MSO4000 and DPO4000 Series Programmer Manual