Commands Listed in Alphabetical Order
Examples POWER:RIPPLE:RESULTS:STDDEV? might return
:POWER:RIPPLE:RESULTS:STDDEV 0.14 indicating that the standard
deviation of the peak-to-peak amplitude is set to 0.14.
POWer:RIPPle:SOUrce
Sets or returns the source waveform for ripple tests. The voltage source waveform
is specied using the POWer:VOLTAGESOurce command and the current
waveform isspecied using the POWer:CURRENTSOurce command.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:RIPPle:SOUrce {VOLTage|CURRent}
Arguments VOLTage species voltage source waveform for ripple tests.
CURRent species current source waveform for ripple tests.
Examples POWER:RIPPLE:SOURCE CURRent sets the ripple source to Current.
POWER:RIPPLE:SOURCE? might return :POWER:RIPPLE:SOURCE VOLT
indicating that the ripple source is set to Voltage.
POWer:SOA:LINear:XMAX
Sets or returns the user XMAX value for use in linear SOA calculations.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:SOA:LINear:XMAX <NR3>
POWer:SOA:LINear:XMAX?
Arguments <NR3> is the XMAX value used for linear SOA calculations.
MSO4000 and DPO4000 Series Programmer Manual 2-287