Commands Listed in Alphabetical Order
POWer:REFLevel:PERCent (No Query Form)
Sets the reference levels to the default percentage values.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:REFLevel:PERCent <SETTODEFaults>
Arguments SETTODEFaults sets the reference levels to their default percentage values.
POWer:REFLevel:PERCent:HIGH
Sets or returns the top reference percent level for power measurements.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:REFLevel:PERCent:HIGH <NR3>; Ranges={D,0.0,100.0}
POWer:REFLevel:PERCent:HIGH?
Arguments <NR3> is the high value in percent.
Examples POWER:REFLEVEL:PERCENT:HIGH 95 sets the high reference level to 95% of
the signal amplitude.
POWER:REFLEVEL:PERCENT:HIGH? might return
:POWER:REFLEVEL:PERCENT:HIGH 90 indicating that the percentage high
reference level is set to 90% of the signal amplitude.
POWer:REFLevel:PERCent:LOW
Sets or returns the low reference percent level for power measurements.
Conditions This command requires a DPO4PWR application module.
MSO4000 and DPO4000 Series Programmer Manual 2-283