Commands Listed in Alphabetical Order
NOTE. The command returns NA if the standarddoes not specify a limit for the
specic harmonic.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:TEST:MIL:NORMAL?
Returns PASS,FAIL,orNA.
POWer:HARMonics:RESults:IEC:FUNDamental? (Query Only)
Returns the IEC fundamental current used in calculating limits.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:IEC:FUNDamental?
Examples POWER:HARMONICS:RESULTS:IEC:FUNDAMENTAL? might return
:POWER:HARMONICS:RESULTS:IEC:FUNDAMENTAL 1.0 indicating that the
IEC fundamental frequency is set to 1.0 A.
POWer:HARMonics:RESults:IEC:HARM3ALTernate? (Query Only)
Returns the IEC harmonics test result for the 3rd harmonic.
NOTE. The command returns NA if the limit does not apply.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:IEC:HARM3ALTernate?
MSO4000 and DPO4000 Series Programmer Manual 2-263