Commands Listed in Alphabetical Order
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce
Sets or returns the data source setting for an setup/hold trigger search to determine
wheretoplaceamark. <x>isthesearchnumber. You cannot specify the same
source for both clock and data.
Group Search
Syntax DPO Models:
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce
{CH1|CH2|CH3|CH4|MATH|REF}
MSO Models:
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce <wfm>[,<wfm>]
[,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>]
[,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>]
[,<wfm>] [,<wfm>] [,<wfm>] [,<wfm>]
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?
Related Commands SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce
Arguments DPO Models:
CH1–CH4 specifies an input channel as the search source.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
MSO Models:
<wfm> can be any combination of the channel, math, reference, and digital
waveforms.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold
Sets or returns the data threshold setting for an setup/hold trigger search to
determine where to place a mark. <x> is the search number.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold
{<NR3>|TTL}
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold?
MSO4000 and DPO4000 Series Programmer Manual 2-377