Commands Listed in Alphabetical Order
HARDCopy:PRINTer:LIST? (Query Only)
Returns a list of currently attached printers.
Group Hard Copy
Syntax HARDCopy:PRINTer:LIST?
HARDCopy:PRINTer:REName(NoQueryForm)
Renames a network printer on the list of available printers, replacing the currently
stored settings with the settings specified in this command. Four arguments must
be present, but the arguments may be empty strings if the value for a field is
to be deleted.
Group Hard Copy
Syntax HARDCopy:PRINTer:REName
<name>,<new_name>,<new_server>,<new_address>
Arguments <name> is the name of the printer to be deleted.
<new_name> is the new name for this printer.
<new_server> is the new print server for this printer.
<new_address> is the new IP address for the server.
HEADer
Sets or returns the Response Header Enable State that causes the oscilloscope to
either include or omit headers on query responses.
NOTE. This command does not affect IEEE Std 488.2-1987 Common Commands
(those starting with an asterisk); these commands never return headers. This
command does affect the Response Header Enable State of both the USBTMC and
VXI-11 interfaces. Refer to the Introduction for additional information.
Group Miscellaneous
MSO4000 and DPO4000 Series Programmer Manual 2-185