Tektronix DPO4000, MSO4000 CURSor:XY:PRODUCT:POSITION<x>? (Query Only), CURSor:XY:PRODUCT:UNIts? (Query Only), CURSor:XY:RATIO:DELta? (Query Only), CURSor:XY:RATIO:POSITION<x>? (Query Only)

Commands Listed in Alphabetical Order
CURSor:XY:PRODUCT:POSITION<x>? (Query Only)
Returns the position of the X or Y cursor used to calculate the X × Y cursor
measurement, Position 1 = (X1 × Y1); Position 2 = (X2 × Y2). The cursor is
specified by x, which can be 1 or 2.
Group Cursor
Syntax CURSor:XY:PRODUCT:POSITION<x>?
CURSor:XY:PRODUCT:UNIts? (Query Only)
Returns the XY cursor product units.
Group Cursor
Syntax CURSor:XY:PRODUCT:UNIts?
CURSor:XY:RATIO:DELta? (Query Only)
Returns the ratio of the difference between the cursors X position and cursor Y
position (ΔY¸ ΔX). The ratio is calculated as (Y2 - Y1) / (X2 - X1).
Group Cursor
Syntax CURSor:XY:RATIO:DELta?
CURSor:XY:RATIO:POSITION<x>? (Query Only)
Returns the X (horizontal) or Y (vertical) position for the specified cursor, which
can be 1 (X) or 2 (Y). The ratio is calculated as Position 1 = (Y1/X1); Position
2 = (Y2/X2).
Group Cursor
Syntax CURSor:XY:RATIO:POSITION<x>?
2-142 MSO4000 and DPO4000 Series Programmer Manual