Commands Listed in Alphabetical Order
Syntax POWer:HARMonics:RESults:HAR<1-400>:RMS:ABSolute?
Examples POWER:HARMONICS:RESULTS:HAR400:RMS:ABSOLUTE? might return
:POWER:HARMONICS:RESULTS:HAR400:RMS:ABSOLUTE 1.0 indicating that
the RMS magnitude of the harmonic is set to 1.0 A.
POWer:HARMonics:RESults:HAR<1-400>:RMS:PERCent? (Query Only)
Returns the RMS magnitude of the harmonic expressed as a percentage of the
fundamental.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:RMS:PERCent?
Examples POWER:HARMONICS:RESULTS:HAR400:RMS:PERCENT? might return
:POWER:HARMONICS:RESULTS:HAR400:RMS:PERCENT 33 indicating that the
RMS magnitude of the harmonic is set to 33%.
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:CLASSALIMit? (Query Only)
Species if the IEC Class A higher harmonic limit (and conditions) are met.
NOTE. The command returns NA if the standarddoes not specify a limit or the
equipment is not class A.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:CLASSALIMit?
Returns PASS,FAIL,orNA.
MSO4000 and DPO4000 Series Programmer Manual 2-261