Tektronix DPO4000, MSO4000 CH<x>:PRObe:DEGAUss (No Query Form), CH<x>:PRObe:DEGAUss:STATE? (Query Only)

Commands Listed in Alphabetical Order
attached probe type. Only certain VPI probes support this command. See the
probe documentation for how to set these string arguments.
Group Vertical
Syntax CH<x>:PRObe:COMMAND <QString>, <QString>
Arguments <QString> are quoted strings specifying the probe command and value to set in
the probe attached to the specified channel.
Examples CH1:PROBE:COMMAND “MODE”, “4–4V1MHz” sets a Tektronix VPI-DPG probe
to the 4-4V1MHz mode.
CH1:PROBE:COMMAND “OUTPUT”, “ON” turns the output of a Tektronix
VPI-DPG probe on.
CH1:PROBE:COMMAND?“MODE” mightreturnCH1:PROBE:COM MAND
“MODE”,“4-4V1MHZ”.
CH<x>:PRObe:DEGAUss (No Query Form)
Starts a degauss auto-zero cycle on a TekVPI current probe attached to the input
channel specified by <x>, where x is the channel number.
Group Vertical
Syntax CH<x>:PRObe:DEGAUss EXECute
Arguments EXECute initiates the degauss operation.
CH<x>:PRObe:DEGAUss:STATE? (Query Only)
Returns the state of the probe degauss for the channel specified by <x>, where is x
is the channel number.
NOTE. This command will return
PASSED for probes that do not support degauss
operations.
Group Vertical
2-124 MSO4000 and DPO4000 Series Programmer Manual