Commands Listed in Alphabetical Order
POWer:HARMonics:IEC:CLAss
Sets or returns the equipment class for IEC harmonics.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:IEC:CLAss {A|B|C1|C2|C3|D}
POWer:HARMonics:IEC:CLAss?
Arguments Aspecifies Class A Equipment.
Bspecifies Class B Equipment.
C1 specifies Class C Equipment that use Table1 limits of the IEC standard.
C2 specifies Class C Equipment that use Table2 limits of the IEC standard.
C3 specifies Class C Equipment that use Table3 limits of the IEC standard.
Dspecifies Class D Equipment.
Examples POWER:HARMONICS:IEC:CLASSB sets Equipment Class B for IEC harmonics.
POWER:HARMONICS:IEC:CLASS? might return
:POWER:HARMONICS:IEC:CLASS A indicating that the Equipment Class is A
for IEC harmonics.
POWer:HARMonics:IEC:FILter
Sets or returns the enabled state for filtering of IEC harmonics.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:IEC:FILter {OFF|ON|0|1}
POWer:HARMonics:IEC:FILter?
Arguments ON or 1 enables filtering of IEC harmonics.
OFF or 0 disables filtering of IEC harmonics.
2-252 MSO4000 and DPO4000 Series Programmer Manual