Commands Listed in Alphabetical Order
Group Power
Syntax POWer:HARMonics:MIL:FUNDamental:USER:CURRent <NR3>
POWer:HARMonics:MIL:FUNDamental:USER:CURRent?
Arguments <NR3> is the current in amperes for USER CALCmethod.
Examples POWER:HARMONICS:MIL:FUNDAMENTAL:USER:CURRENT 2 sets the RMS
fundamental current to 2 A in calculating limits.
POWER:HARMONICS:MIL:FUNDAMENTAL:USER:CURRENT? might return
:POWER:HARMONICS:MIL:FUNDAMENTAL:USER:CURRENT 1.0000 indicating
that the RMS fundamental current for use in calculating limits is 1.0000 A.
POWer:HARMonics:MIL:LINEFREQuencySets or returns the line frequency for MIL-STD-1399 harmonics tests. Valid
values are 60 or 400 Hz.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:MIL:LINEFREQuency <NR3>
POWer:HARMonics:MIL:LINEFREQuency?
Arguments <NR3> is the line frequency for MIL standard.
Examples POWER:HARMONICS:MIL:LINEFREQUENCY 60 sets the MIL line frequency to
60 Hz.
POWER:HARMONICS:MIL:LINEFREQUENCY? might return
:POWER:HARMONICS:MIL:LINEFREQUENCY 400 indicating that the
MIL line frequency is set to 400 Hz.
POWer:HARMonics:MIL:POWERLEVelSets or returns the power level for calculating limits for MIL-STD-1399
harmonics tests.
MSO4000 and DPO4000 Series Programmer Manual 2-257