Commands Listed in Alphabetical Order
Group Cursor
Syntax CURSor:HBArs:DELTa?
Related Commands CURSor:HBArs:UNIts
Returns Aoating point value with an exponent.
Examples CURSOR:HBARS:DELTA? might return :CURSOR:HBARS:DELTA 5.0800E+00
indicating that the difference between the two cursors is 5.08.
CURSor:HBArs:POSITION<x>
Sets or returns the horizontal bar cursor position relative to ground, which is
expressed in vertical units (usually volts). The cursor is specied by x, which
can be 1 or 2.
Group Cursor
Syntax CURSor:HBArs:POSITION<x> <NR3>
CURSor:HBArs:POSITION<x>?
Related Commands CURSor:FUNCtion
Arguments <NR3> species the cursor position relative to ground.
Examples CURSOR:HBARS:POSITION1 25.0E-3 positions Cursor 1 of the horizontal
cursors at 25 mV.
CURSOR:HBARS:POSITION2? might return :CURSOR:HBARS:POSITION2
-64.0000E-03 indicating that Cursor 2 of the horizontal bar cursors is at -64 mV.
CURSor:HBArs:UNIts
Sets or returns the units for the horizontal bar cursors.
Group Cursor
2-134 MSO4000 and DPO4000 Series Programmer Manual