Tektronix DPO4000, MSO4000 BUS:B<x>:PARallel:CLOCK:ISCLOCKed, BUS:B<x>:PARallel:CLOCK:SOUrce, BUS:B<x>:PARallel:WIDth

Commands Listed in Alphabetical Order
Syntax BUS:B<x>:PARallel:CLOCK:EDGE {EITher|RISing|FALling}
BUS:B<x>:PARallel:CLOCK:EDGE?
Arguments EIther specifies either edge as the clock edge.
RISing specifies the rising edge as the clock edge.
FALling specifies the falling edge as the clock edge.
BUS:B<x>:PARallel:CLOCK:ISCLOCKed
Sets or returns the parallel bus clock function for bus <x>, where x is the bus
number.
Group Bus
Syntax BUS:B<x>:PARallel:CLOCK:ISCLOCKed {YES|NO}
BUS:B<x>:PARallel:CLOCK:ISCLOCKed?
Arguments YES specifes that the Parallel bus is clocked.
NO specifes that the Parallel bus is not clocked.
BUS:B<x>:PARallel:CLOCK:SOUrce
Sets or returns the Parallel bus source <x>, where x is the bus number.
Group Bus
Syntax BUS:B<x>:PARallel:CLOCK:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:PARallel:CLOCK:SOUrce?
Arguments CH1–CH4 or D0–D15 specifies the channel to use as the Parallel bit source.
BUS:B<x>:PARallel:WIDth
Sets or returns the number of bits used for the width of the Parallel bus <x>,
where x is the bus number.
MSO4000 and DPO4000 Series Programmer Manual 2-101