Commands Listed in Alphabetical Order
Examples POWER:SOA:MASK:STOPONVIOL 1 disables the state of the mask stop on
violation condition.
POWER:SOA:MASK:STOPONVIOL ? might return
:POWER:SOA:MASK:STOPONVIOL 0 indicating that the mask stop is enabled.
POWer:SOA:PLOTTYPe
Sets or returns the Safe Operating Area (SOA) plot type.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:SOA:PLOTTYPe {LOG|LINear}
POWer:SOA:PLOTTYPe?
Arguments LOG for logarithmic SOA plot type.
LINear for linear SOA plot type.
Examples POWER:SOA:PLOTTYPE LINear sets the SOA plot type to Linear.
POWER:SOA:PLOTTYPE ? might return :POWER:SOA:PLOTTYPE LOG indicating
that the SOA plot type is set to Log.
POWer:SOA:RESult:FAILures:QTY? (Query Only)
Returns the number of failures in the test.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:SOA:RESult:FAILures:QTY?
Examples POWER:SOA:RESULT:FAILURES:QTY? might return
:POWER:SOA:RESULT:FAILURES 0 indicating that the number of failures is 0.
MSO4000 and DPO4000 Series Programmer Manual 2-295