Commands Listed in Alphabetical Order
POWER:QUALITY:DISPLAY:VCRESTFACTOR? might return
:POWER:QUALITY:DISPLAY:VCRESTFACTOR 0 indicating that the
voltage crest factor display is off.
POWer:QUALity:DISplay:VRMS
Sets or returns the display state for the rms voltage readout.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:DISplay:VRMS {OFF|ON|0|1}
POWer:QUALity:DISplay:VRMS?
Arguments OFF or 0 turns off the rms voltage display.
ON or 1 turns on the rms voltage display.
Examples POWER:QUALITY:DISPLAY:VRMS0 turns off the rms voltage display.
POWER:QUALITY:DISPLAY:VRMS? might return
:POWER:QUALITY:DISPLAY:VRMS 1 indicating that the rms voltage display
is on.
POWer:QUALity:FREQREFerence
Sets or returns the power quality frequency reference.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:FREQREFerence {VOLTage|CURRent}
POWer:QUALity:FREQREFerence?
Arguments VOLTage sets voltage as the power quality frequency reference source.
CURRent sets current as the power quality frequency reference source.
2-276 MSO4000 and DPO4000 Series Programmer Manual