Commands Listed in Alphabetical Order
BUS:B<1-4>:AUDio:DATa:POLaritySets or returns the data polarity for the AUDIO bus.
Conditions This command requires DPO4AUDIO application module.
Group Bus
Syntax BUS:B<1-4>:AUDio:DATa:POLarity {NORMal|INVERTed}
BUS:B<1-4>:AUDio:DATa:POLarity?
Arguments NORMal specifies positive data polarity for the audio bus.
INVERTed specifies negative data polarity for the audio bus.
Examples BUS:B1:AUDIO:DATA:POLARITY INVERTed sets the data polarity to Inverted.
BUS:B1:AUDIO:DATA:POLARITY? might return
:BUS:B1:AUDIO:DATA:POLARITY NORMAL indicating that the data polarity is
set to Normal.
BUS:B<1-4>:AUDio:DATa:SIZeSets or returns the number of bits per word for the AUDIO bus.
NOTE. The number of bits specified for this command must be always less than or
equal to the number of bits per channel (BUS:B<x>:AUDio:CHANnel:SIZe)
Conditions This command requires DPO4AUDIO application module.
Group Bus
Syntax BUS:B<1-4>:AUDio:DATa:SIZe <NR1>
BUS:B<1-4>:AUDio:DATa:SIZe?
Arguments NR1 specifiesthenumberofbitsperword.
2-86 MSO4000 and DPO4000 Series Programmer Manual