Tektronix DPO4000, MSO4000 CH<x>:PRObe:ID? (Query Only), CH<x>:PRObe:ID:SERnumber? (Query Only)

Commands Listed in Alphabetical Order
Related Commands CH<x>:SCAle
Arguments <NR3> is the probe gain. Allowed values depend on the specificprobe.
Examples CH2:PROBE:GAIN? might return :CH2:PROBE:GAIN 0.1000E+00 indicating
that the attached 10x probe delivers 1 V to the channel 2 BNC for every 10 V
applied to the probe input.
CH<x>:PRObe:ID? (Query Only)
Returns the type and serial number of the probe attached to channel <x>, where x
is the channel number.
Group Vertical
Syntax CH<x>:PRObe:ID?
Examples CH2:PROBE:ID? might return :CH2:PROBE:ID:TYPE "10X";SERNUMBER
"N/A" indicating that a passive 10x probe of unknown serial number is attached
to channel 2.
CH<x>:PRObe:ID:SERnumber? (Query Only)
Returns the serial number of the probe attached to channel <x>, where x is the
channel number.
NOTE. For Level 0 and 1 probes, the serial number will be "".
Group Vertical
Syntax CH<x>:PRObe:ID:SERnumber?
Examples CH1:PROBE:ID:SERNUMBER? might return :CH1:PROBE:ID:SERNUMBER
"B010289" indicating that the serial number of the probe attached to channel 1
is B010289.
2-126 MSO4000 and DPO4000 Series Programmer Manual