Commands Listed in Alphabetical Order
SEARCH:SEARCH<x>:STATE
Sets the search state to on or off. <x> is the search number, which is always 1.
The query form returns the search state.
Group Search
Syntax SEARCH:SEARCH<x>:STATE {<NR1>|OFF|ON}
SEARCH:SEARCH<x>:STATE?
Arguments OFF or <NR1> = 0 sets the search state to off.
ON or <NR1> ≠0 sets the search state to on.
SEARCH:SEARCH<x>:TOTAL? (Query Only)
Returns the total number of matches for the search. The total number of matches
may be than the number of marks placed. <x> is the search number, which
is always 1.
Group Search
Syntax SEARCH:SEARCH<x>:TOTAL?
Returns <NR1> is the total number of matches.
SEARCH:SEARCH<x>:TRIGger:A:BUS? (Query Only)
Returns the serial search type. <x> is the search number, which is always 1. There
are four serial buses, B1 through B4.
Conditions This command requires a DPO4AUTO or DPO4EMBD application module.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:BUS?
Returns I2Cspecifies the Inter-IC bus.
MSO4000 and DPO4000 Series Programmer Manual 2-331