Tektronix DPO4000, MSO4000 MSO4000 and DPO4000 Series Programmer Manual 2-49

Command Groups
Table 2-31: Trigger Commands (cont.)
Command Description
TRIGger:A Sets A trigger level to 50%
or returns current A trigger
parameters
TRIGger:A:BUS Sets or returns the serial
trigger type
TRIGger:A:BUS:B<1-4>:AUDio:CONDition Sets or returns the trigger
condition for the AUDIO bus:
Start of Frame or Data
TRIGger:A:BUS:B<1-4>:AUDio:DATa:HIVALue Setsor returns the trigger
data upper word for the
AUDIO bus
TRIGger:A:BUS:B<1-4>:AUDio:DATa:OFFSet Setsor returns the trigger
dataoffsetfortheAUDIO
bus
TRIGger:A:BUS:B<1-4>:AUDio:DATa:QUALifier Setsor returns the trigger
data qualifier for the AUDIO
bus
TRIGger:A:BUS:B<1-4>:AUDio:DATa:VALue Setsor returns the trigger
data lower word for the
AUDIO bus
TRIGger:A:BUS:B<1-4>:AUDio:DATa:WORD Setsor returns the trigger
data alignment for the
AUDIO bus.
TRIGger:A:BUS:B<x>:CAN:CONDition Sets or returns the CAN
condition
TRIGger:A:BUS:B<x>:CAN:DATa:DIRection Setsor returns the CAN
trigger condition to be valid
ona READ, WRITE, or either
TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier Setsor returns the CAN data
qualifier
TRIGger:A:BUS:B<x>:CAN:DATa:SIZe Setsor returns the length of
thedatastringinbytestobe
used for CAN trigger
TRIGger:A:BUS:B<x>:CAN:DATa:VALue Setsor returns the binary
datastringtobeusedfor
CAN trigger
TRIGger:A:BUS:B<x>:CAN:FRAMEtype Sets or returns the CAN
trigger frame type
TRIGger:A:BUS:B<x>:CAN{:IDentifier|:ADDRess}:MODe Sets or returns the CAN
addressing mode
TRIGger:A:BUS:B<x>:CAN{:IDentifier|:ADDRess}:VALue Sets or returns the binary
address string used for the
CAN trigger
MSO4000 and DPO4000 Series Programmer Manual 2-49