Tektronix DPO4000, MSO4000 Table 3-5: Execution Error Messages (EXE Bit 4) (cont.), MSO4000 and DPO4000 Series Programmer Manual 3-15

Status and Events
Table 3-5: Execution Error Messages (EXE Bit 4) (cont.)
Code Message
2215 Measurementerror, No crossing, second waveform
2216 Measurementerror, No crossing, target waveform
2217 Measurementerror, Constant waveform
2219 Measurement error, No valid edge - No arm sample
2220 Measurement error, No valid edge - No arm cross
2221 Measurement error, No valid edge - No trigger cross
2222 Measurement error, No valid edge - No second cross
2223 Measurement error, Waveformmismatch
2224 Measurement error, WAIT calculating
2225 Measurement error, No waveform to measure
2226 Measurement error, Null Waveform
2227 Measurement error, Positive and Negative Clipping
2228 Measurement error, Positive Clipping
2229 Measurement error, Negative Clipping
2230 Measurement error, High Ref < Low Ref
2231 Measurement error, No statistics available
2233 Requested waveform is temporarily unavailable
2235 Math error, invalid math description
2240 Invalid password
2241 Waveform requested is invalid
2244 Source waveform is not active
2245 Saveref error, selected channelis turned off
2250 Reference error, the reference waveform file is invalid
2253 Reference error, too many points received
2254 Reference error, too few points received
2259 File too big
2270 Alias error
2271 Alias syntax error
2273 Illegal alias label
2276 Alias expansion error
2277 Alias redefinition not allowed
2278 Alias header not found
2285 TekSecure(R)Pass
2286 TekSecure(R)Fail
2500 Setup error, file does not look like a setup file
2501 Setup warning, could not recall all values from external setup
2620 Mask error, too few points received
MSO4000 and DPO4000 Series Programmer Manual 3-15