Commands Listed in Alphabetical Order
Examples POWER:QUALITY:FREQREFERENCE CURRent sets current as the power quality
frequency reference source.
POWER:QUALITY:FREQREFERENCE? might return
:POWER:QUALITY:FREQREFERENCE VOLTAGE indicating that the power quality
frequency reference source is set to Voltage.
POWer:QUALity:FREQuency? (Query Only)
Returns the frequency measurement.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:FREQuency?
Examples POWER:QUALITY:FREQUENCY? might return :POWER:QUALITY:FREQUENCY
60 indicating that the frequency is set to 60 Hz.
POWer:QUALity:ICRESTfactor? (Query Only)
Returns the current crest factor measurement.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:ICRESTfactor?
Examples POWER:QUALITY:ICRESTFACTOR? might return
:POWER:QUALITY:ICRESTfactor 1.4 indicating that the current crest factor
value is set to 1.4.
POWer:QUALity:IRMS? (Query Only)
Returns the RMS current measurement.
MSO4000 and DPO4000 Series Programmer Manual 2-277