Commands Listed in Alphabetical Order
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe?
Arguments <NR1> is the data string length in bytes.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue
Sets or returns the binary data string to be used for an I2C trigger search if the
search condition is DATAor ADDRANDDATA. SEARCH<x> is the search
number and B<x> is the bus number.
Conditions This command requires a DPO4EMBD application module.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue <bin>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue?
Arguments <bin> is the data in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition
Sets or returns the search condition for a LIN search.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition
{SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|SLEEP|ERROR}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition?
Arguments SYNCField specifies to search on the sync field.
IDentifier specifies to search on the identifier.
DATA specifies to search on the data.
IDANDDATAspecifies to search on the identifier and the data.
WAK Eup sp eci fiesto search on wake up.
MSO4000 and DPO4000 Series Programmer Manual 2-353