Commands Listed in Alphabetical Order
Examples POWER:HARMONICS:RESULTS:IEC:POWERFACTOR? might return
:POWER:HARMONICS:RESULTS:IEC:POWERFACTOR 9.1900E+37 indicating
that the IEC power factor is set to 9.1900E+37.
POWer:HARMonics:RESults:PASSFail? (Query Only)Returns the overall harmonics test result: PASS, FAIL or NA.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:PASSFail?
Examples POWER:HARMONICS:RESULTS:PASSFAIL? might return
:POWER:HARMONICS:RESULTS:PASSFAIL PASS indicating that the
harmonics test passed.
POWer:HARMonics:RESults:RMS? (Query Only)Returns the root mean square value of the harmonics source waveform.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:RMS?
Examples POWER:HARMONICS:RESULTS:RMS? might return
:POWER:HARMONICS:RESULTS:RMS 1.0 indicating that the harmonics source
waveform RMS is set to 1.0.
POWer:HARMonics:RESults:SAVe (No Query Form)Saves the harmonic results to the specified file in CSV format.
Conditions This command requires a DPO4PWR application module.
2-266 MSO4000 and DPO4000 Series Programmer Manual