Commands Listed in Alphabetical Order
MEASUrement:MEAS<x>:STATESets or returns whether the specified measurement slot is computed and displayed.
The measurement slot is specified by <x>, which ranges from 1 through 4.
For a measurement to display, you must have selected a source waveform
and defined the measurement you want to take and display. You select the
measurementusingtheMEASUrement:MEAS<x>:SOURCE[1] command.
You d efine the measurement type using the MEASUrement:MEAS<x>:TYPe
command.
Group Measurement
Syntax MEASUrement:MEAS<x>:STATE {OFF|ON|<NR1>}
MEASUrement:MEAS<x>:STATE?
Related Commands MEASUrement:MEAS<x>:SOURCE[1],MEASUrement:MEAS<x>:TYPe
Arguments OFF disables calculation and display of the specified measurement slot.
ON enables calculation and display of the specified measurement slot.
<NR1> = 0 disables calculation and display of the specified measurement slot;any
other value enables calculation and display of the specified measurement slot.
Examples MEASUREMENT:MEAS2:STATE ON computes and displays the measurement
defined as measurement 2.
MEASUREMENT:MEAS1:STATE? might return :MEASUREMENT:MEAS1:STATE 0
indicating that measurement defined for measurement slot 1 is disabled.
MEASUrement:MEAS<x>:STDdev? (Query Only)Returns the standard deviation of values accumulated for this measurement since
the last statistical reset. Measurements are specified by <x>, the measureme nt
slots, from 1 through 4.
Group Measurement
Syntax MEASUrement:MEAS<x>:STDdev?
2-222 MSO4000 and DPO4000 Series Programmer Manual