Commands Listed in Alphabetical Order
Examples DIAG:RESULT:FLAG? might return DIAG:RESULT:FLAG PASS.
DIAg:RESUlt:LOG? (Query Only)Returns the internal results log from the last self-test sequence execution. The
list contains all modules and module interfaces that were tested along with the
pass/fail status of each.
Group Calibration and Diagnostic
Syntax DIAg:RESUlt:LOG?
Related Commands DIAg:RESUlt:FLAg?
Returns <QString> in the following format:
<Status>--<Module name>[,<Status>--<Module name>...]
Examples DIAG:RESULT:LOG? might return :DIAG:RESULT:LOG "NOT RUN--CPU,NOT
RUN--DISPLAY,NOT RUN--FPANEL,NOT RUN--IO,NOT RUN--ACQ,NOT
RUN--RO M,NOT RUN--APPKEY"
DIAg:SELect (No Query Form)Sets the type of diagnostics grouping.
Group Calibration and Diagnostic
Syntax DIAg:SELect {ALL|APPKey|CPU|DISplay|FPAnel|IO|ROM|ACQ}
Arguments ALL runs all diagnostic groups.
APPKey runs just the application key diagnostic group.
CPU runs just the CPU diagnostic group.
DISplay runs just the display circuit diagnostic group.
FFPAnel runs just the front panel diagnostic group.
IO runs just the IO board diagnostic group.
2-156 MSO4000 and DPO4000 Series Programmer Manual