Commands Listed in Alphabetical Order
BUS:B<x>:SPI:FRAMING
Sets or returns the type of SPI framing.
Group Bus
Syntax BUS:B<x>:SPI:FRAMING {SS|IDLEtime}
BUS:B<x>:SPI:FRAMING?
Arguments SS specifies framing by SS (non 2-wire).
IDLEtime specifiesframingbyIdleTime(2-wire).
Examples BUS:B1:SPI:FRAMING SS sets the SPI framing type to SS.
BUS:B1:SPI:FRAMING IDELTIME might return BUS:B1:SPI:FRAMING
IDELTIME indicating the SPI framing type is set to IDLETIME.
BUS:B<x>:SPI:IDLETime
Sets or returns the SPI bus idle time in seconds for the specified bus.
Group Bus
Syntax BUS:B<x>:SPI:IDLETime <NR3>
BUS:B<x>:SPI:IDLETime?
Arguments NR3 is the SPI bus idle time in seconds.
Examples BUS:B1:SPI:IDLETIME 100.0000E-9 sets the idle time to 100 ns.
BUS:B1:SPI:IDLETIME? might return BUS:B1:SPI:IDLETIME
100.0000E-9 indicating the idle time is set to 100 ns.
BUS:B<x>:SPI{:SELect|:SS}:POLARity
Sets or returns the SPI SS polarity for bus <x>, where x is the bus number.
Conditions This command requires a DPO4EMBD application module.
MSO4000 and DPO4000 Series Programmer Manual 2-109