Commands Listed in Alphabetical Order
MEASUrement:REFLevel:PERCent:LOW
Sets or returns the percent (where 100% is equal to HIGH) used to calculate the
low reference level when MEASUrement:REFLevel:METHod is set to Percent.
This command affects the results of rise and fall measurements.
NOTE. this command affects the associated reference level parameter for all
MEASurements:IMMed and the four periodic measurements.
Group Measurement
Syntax MEASUrement:REFLevel:PERCent:LOW <NR3>
MEASUrement:REFLevel:PERCent:LOW?
Related Commands MEASUrement:REFLevel:METHod,MEASUrement:IMMed:TYPe,
MEASUrement:MEAS<x>:TYPe
Arguments <NR3> is the low reference level, ranging from 0 to 100%. The default low
reference level is 10%.
Examples MEASUREMENT:REFLEVEL:PERCENT:LOW 15 sets the high reference level to
15% of HIGH.
MEASUREMENT:REFLEVEL:PERCENT:LOW? might return
:MEASUREMENT:REFLEVEL:PERCENT:LOW 10 indicating that the
percentage high reference level is set to 10% of HIGH.
MEASUrement:REFLevel:PERCent:MID[1]
Sets or returns the percent (where 100% is equal to HIGH) that is used to calculate
the mid reference level when MEASUrement:REFLevel:METHod is set to
Percent. This command affects the results of period, frequency, delay, and all
cyclic measurements.
NOTE. this command affects the associated reference level parameter for all
MEASurements:IMMed and the four periodic measurements.
Group Measurement
2-232 MSO4000 and DPO4000 Series Programmer Manual