Commands Listed in Alphabetical Order
set with the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> and
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> commands.
PULSEWIdth triggers when a pulse is found that has the specified
polarity and is either inside or outside the limits as specified by
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit.
The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT:
POLarity command.
TRANsition triggers when a pulse crosses both thresholds in the same direction
as the specified polarity and the transition time between the two threshold
crossings is greater or less than the specified time delta.
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>
Sets or returns the channel waveform upper threshold to determine where to
place a mark. This setting is applied to all channel searches that uses an upper
threshold.SEARCH<x> is the search number and CH<x> is the channel number.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> {TTL}
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>?
Arguments TTL specifies a preset TTL high level of 1.4 V.
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH
Sets or returns the math waveform upper threshold to determine where to place a
mark. This setting is applied to all math waveform searches that uses an upper
threshold. <x> is the search number.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH {TTL}
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH?
Arguments TTL specifies a preset TTL high level of 1.4 V.
2-382 MSO4000 and DPO4000 Series Programmer Manual