Tektronix DPO4000, MSO4000 2-52 MSO4000 and DPO4000 Series Programmer Manual

Command Groups
Table 2-31: Trigger Commands (cont.)
Command Description
TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue Sets or returns the binary
address string used for LIN
trigger
TRIGger:A:BUS:B<x>:PARallel:VALue Setsor returns the binary
datastringtobeusedfora
Parallel trigger
TRIGger:A:BUS:B<x>:RS232C:CONDition Sets or returns the condition
for an RS-232C trigger
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe Setsor returns the length of
the data string in Bytes for
an RX RS-232 Trigger
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue Setsor returns the binary
data string for an RXRS-232
trigger
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe Setsor returns the length
of the data string for a TX
RS-232 trigger
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue Setsor returns the binary
data string for an RS-232
trigger if the trigger condition
involves TX
TRIGger:A:BUS:B<x>:SPI:CONDition Sets or returns the trigger
condition for SPI triggering
TRIGger:A:BUS:B<x>:SPI:DATa{:IN|:MISO}:VALue Setsor returns the binary
datastringtobeusedforSPI
trigger
TRIGger:A:BUS:B<x>:SPI:DATa{:OUT|:MOSI}:VALue Setsor returns the binary
data string used for the SPI
trigger
TRIGger:A:BUS:B<x>:SPI:DATa:SIZe Setsor returns the length of
thedatastringinbytestobe
used for SPI trigger
TRIGger:A:BUS:SOUrce Sets or returns the source
for a bus trigger
TRIGger:A:EDGE? Returns the source, coupling
and source for the A edge
trigger
TRIGger:A:EDGE:COUPling Sets or returns the type
of coupling for the A edge
trigger
TRIGger:A:EDGE:SLOpe Sets or returns the slope for
the A edge trigger
TRIGger:A:EDGE:SOUrce Sets or returns the source
for the A edge trigger
2-52 MSO4000 and DPO4000 Series Programmer Manual