Commands Listed in Alphabetical Order
Syntax POWer:HARMonics:IEC:LINEFREQuency <NR3>
POWer:HARMonics:IEC:LINEFREQuency?
Arguments <NR3> is the line frequency. The valid values are 50 and 60.
Examples POWER:HARMONICS:IEC:LINEFREQUENCY 50 sets the line frequency to 50 Hz.
POWER:HARMONICS:IEC:LINEFREQUENCY? might return
:POWER:HARMONICS:IEC:LINEFREQUENCY 60 indicating that the
line frequency value is set to 60 Hz.
POWer:HARMonics:IEC:OBSPERiod
Sets or returns the IEC observation period.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:IEC:OBSPERiod <NR3>
POWer:HARMonics:IEC:OBSPERiod?
Arguments <NR3> is the IEC observation period. Valid values ranges from 0.2 to 10 s.
Examples POWER:HARMONICS:IEC:OBSPERIOD 3 sets the IEC observation period to
3.0000 s.
POWER:HARMONICS:IEC:OBSPERIOD? might return
:POWER:HARMONICS:IEC:OBSPERIOD 10 indicating that the IEC observation
period is set to 10 s.
POWer:HARMonics:IEC:POWERFACtor
Sets or returns the rated power factor for IEC harmonics.
Conditions This command requires a DPO4PWR application module.
Group Power
MSO4000 and DPO4000 Series Programmer Manual 2-255