Commands Listed in Alphabetical Order
Group Power
Syntax POWer:RIPPle {VERTAUTOset|VERTDEFault}
Arguments VERTAUTOset automatically scales the source waveform to optimize ripple
measurements.
VERTDEFault sets the vertical offset of the source waveform to 0 volts (for
voltage source) or 0 amperes (for current source).
POWer:RIPPle:RESults:AMPLitude? (Query Only)Returns the peak-to-peak ripple measurement.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:RIPPle:RESults:AMPLitude?
Examples POWER:RIPPLE:RESULTS:AMPLITUDE? might return
:POWER:RIPPLE:RESULTS:AMPLITUDE 1 indicating that the peak-to-peak
amplitude is set to 1 V.
POWer:RIPPle:RESults:MAX? (Query Only)Returns the maximum of the peak-to-peak ripple measurements.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:RIPPle:RESults:MAX?
Examples POWER:RIPPLE:RESULTS:MAX? might return :POWER:RIPPLE:RESULTS:MAX
1.1 indicating that the maximum peak-to-peak amplitude is set to 1.1 V.
MSO4000 and DPO4000 Series Programmer Manual 2-285