Commands Listed in Alphabetical Order
Examples TRIGGER:A:BUS:B1:CAN:CONDITION? might return :TRIGGER:A:BUS:B1:
CAN:CONDITION EOF indicating an end of file condition.
TRIGGER:A:BUS:B1:CAN:CONDITION DATA enables triggering on matching
CAN data.
TRIGger:A:BUS:B<x>:CAN:DATa:DIRection
Sets or returns the CAN trigger data direction to be valid on a Read, Write,
or Either condition for bus <x>, where x is the bus number. This applies only,
if the trigger condition is ID.
Conditions Requires a DPO4AUTO application module.
Group Trigger
Syntax TRIGger:A:BUS:B<x>:CAN:DATa:DIRection {READ|WRITE|NOCARE}
TRIGger:A:BUS:B<x>:CAN:DATa:DIRection?
Arguments READ sets the CAN data direction to READ.
WRITE sets the CAN data direction to WRITE.
NOCARE sets the CAN data direction to either.
Examples TRIGGER:A:BUS:B1:CAN:DATA:DIRECTION WRITE sets the CAN data
direction to Write.
TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier
Sets or returns the CAN data qualifier for bus <x>, where x is the bus number.
This applies only, if the trigger condition is IDANDDATA or DATA.
Conditions Requires a DPO4AUTO application module.
Group Trigger
Syntax TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier
{LESSThan|Than|EQUal|UNEQual|LESSEQual|EQual}
TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier?
2-398 MSO4000 and DPO4000 Series Programmer Manual