Commands Listed in Alphabetical Order
Arguments DC selects DC trigger coupling.
HFRej selects high-frequency reject coupling.
LFRej selects low-frequency reject coupling.
NOISErej selects DC low sensitivity.
Examples TRIGGER:B:EDGE:COUPLING DC selects DC for the B trigger coupling.
TRIGGER:B:EDGE:COUPLING? might return :TRIGGER:B:EDGE:COUPLING
ATRIGGER for the B trigger coupling.
TRIGger:B:EDGE:SLOpe
Sets or returns the slope for the B trigger.
Group Trigger
Syntax TRIGger:B:EDGE:SLOpe {RISe|FALL}
TRIGger:B:EDGE:SLOpe?
Related Commands TRIGger:B:EDGE?
Arguments RISe triggers on the rising or positive edge of a signal.
FALL triggers on the falling or negative edge of a signal.
Examples TRIGGER:B:EDGE:SLOPE FALL sets the B edge trigger to occur on the falling
slope.
TRIGGER:B:EDGE:SLOPE? might return :TRIGGER:B:EDGE:SLOPE RISE
indicating that the B edge trigger occurs on the rising slope.
TRIGger:B:EDGE:SOUrce
Sets or returns the source for the B trigger.
Group Trigger
Syntax TRIGger:B:EDGE:SOUrce {CH<x>|EXT|LINE}
TRIGger:B:EDGE:SOUrce?
MSO4000 and DPO4000 Series Programmer Manual 2-465