Commands Listed in Alphabetical Order
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:NORMAL? (Query Only)
Species if the Normal IEC harmonic limits are met.
NOTE. The command returns NA if the standard does not specify a limit.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:NORMAL?
Returns PASS,FAIL,orNA.
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:POHCLIMit? (Query Only)
Species if the higher harmonic limit (and conditions) for the 21st and higher
order odd harmonics are met.
NOTE. The command returns NA if the limit does not apply for a specic
harmonic.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:POHCLIMit?
Returns PASS,FAIL,orNA.
POWer:HARMonics:RESults:HAR<1-400>:TEST:MIL:NORMAL? (Query Only)
Returns the test result for the specied harmonic for the MIL-STD-1399 testing
standard.
This query is analogous to that for the IEC 61000-3-2 standard
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:NORMAL?command.
2-262 MSO4000 and DPO4000 Series Programmer Manual