Commands Listed in Alphabetical Order
Group Trigger
Syntax TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue?
Arguments <Qstring> is the binary data string to be used for the trigger.
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe
Sets or returns the length of the data string for an RS-232 trigger if the trigger
condition is TXDATA. Applies to bus <x>, where x is the bus number.
Conditions This command requires a DPO4COMP application module.
Group Trigger
Syntax TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe <NR1>
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe?
Arguments <NR1> is the length of the data string in Bytes.
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue
Sets or returns the binary data string for an RS-232 trigger if the condition
involves TX. Applies to bus <x>, where x is the bus number.
Conditions This command requires a DPO4COMP application module.
Group Trigger
Syntax TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue?
Arguments <Qstring> is the binary data string to be used for the trigger.
2-422 MSO4000 and DPO4000 Series Programmer Manual