Commands Listed in Alphabetical Order
CH<x>:PRObe:ID:TYPE? (Query Only)
Returns the type of probe attached to the channel specified by <x>, where x
is the channel number. Level 2 (or higher) probes supply their exact product
nomenclature; for Level 0 or 1 probes, a generic “No Probe Detected message is
returned.
Group Vertical
Syntax CH<x>:PRObe:ID:TYPE?
Examples CH1:PROBE:ID:TYPE? might return :CH1:PROBE:ID:TYPE "P6203"
indicating that P6203-type probe is attached to channel 1.
CH<x>:PRObe:MODel
Sets or returns the probe model for the specified channel. If a coded probe is
attached or the specified model is not recognized, an error event is set. The
argument must be a supported probe.
To find the list of supported probes, push the front-panel channel 1,2,3,or4
button, then push the lower-menu More item as many times as needed to select
Deskew.PushProbe Model on the side menu and turn knob ato help you read
from the resulting list. Alternatively, you can push Tes t >Analysis>Deskew >
Configure >Probe Model and read from the resulting list.
Group Vertical
Syntax CH<x>:PRObe:MODel<String>
CH<x>:PRObe:MODel?
CH<x>:PRObe:PROPDELay
Sets or returns the propagation delay for the probe connected to the specified
channel.
Group Vertical
Syntax CH<x>:PRObe:PROPDELay<NR3>
CH<x>:PRObe:PROPDELay?
MSO4000 and DPO4000 Series Programmer Manual 2-127