Commands Listed in Alphabetical Order
Examples POWER:SWLOSS:CONDUCTION:POWER:MIN? might return
:POWER:SWLOSS:CONDUCTION:POWER:MIN 1 indicating that the
minimum conduction power switching loss calculation is set to 1 W.
POWer:SWLoss:DISplaySets or returns the display selection for switching loss results: All measurements,
energy loss measurements or power loss measurements.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:SWLoss:DISplay {ALL|ENERGYLoss|POWERLoss}
POWer:SWLoss:DISplay?
Arguments ALL displays both energy and power loss measurements in the results.
ENERGYLoss displays only energy loss measurements in the results.
POWERLoss displays only power loss measurements in the results.
Examples POWER:SWLOSS:DISPLAY ENERGYLoss displays only energy loss measurements
in the results.
POWER:SWLOSS:DISPLAY ? might return :POWER:SWLOSS:DISPLAY ALL
indicating that the results displays both energy and power loss measurements.
POWer:SWLoss:GATe:POLaritySets or returns the switching loss gate polarity.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:SWLoss:GATe:POLarity {FALL|RISe}
POWer:SWLoss:GATe:POLarity?
MSO4000 and DPO4000 Series Programmer Manual 2-301