Commands Listed in Alphabetical Order
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:REFLevel:HYSTeresis <NR3>
POWer:REFLevel:HYSTeresis?
Arguments <NR3> is the hysteresis value.
Examples POWER:REFLEVEL:HYSTERESIS 30 sets the hysteresis value to 30.
POWER:REFLEVEL:HYSTERESIS? might return
POWER:REFLEVEL:HYSTERESIS 10 indicating that the hysteresis value is
set to 10.
POWer:REFLevel:METHod
Sets or returns the method used to calculate the 0% and 100% reference level.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:REFLevel:METHod {ABSolute|PERCent}
POWer:REFLevel:METHod?
Arguments ABSolute specifies that the reference levels are set explicitly using the
MEASUrement:REFLevel:ABSolute commands. This method is useful when
precise values are required.
PERCent specifies that the reference levels are calculated as a percent
of the signal amplitude. The percentages are defined using the
MEASUrement:REFLevel:PERCent commands.
Examples POWER:REFLEVEL:METHOD ABSOLUTE specifies that explicit user-defined values
are used for the reference levels.
POWER:REFLEVEL:METHOD? might return POWER:REFLEVEL:METHOD
PERCENT indicating that the reference level units used are calculated as a percent
relative to HIGH and LOW.
2-282 MSO4000 and DPO4000 Series Programmer Manual