Commands Listed in Alphabetical Order
CURSor:XY:RATIO:UNIts? (Query Only)
Returns the cursor X and cursor Y units for the ratio measurement.
Group Cursor
Syntax CURSor:XY:RATIO:UNIts?
CURSor:XY:READOUT
Sets or returns the XY cursor readout selection. This command is useful for
oscilloscope models with limited display room. Oscilloscopes with sufficient
display, such as the MSO4000 and DPO4000 series, show all the readouts
simultaneously.
Group Cursor
Syntax CURSor:XY:READOUT {RECTangular|POLARCord|PRODuct|RATio}
CURSor:XY:READOUT?
Arguments RECTangular specifies the XY readout as rectangular coordinates.
POLARCord specifies the XY readout as polar coordinates.
PRODuct specifies the XY readout in X*Y format.
RATio specifies the XY readout in X:Y format.
CURSor:XY:RECTangular:X:DELta? (Query Only)
Returns the cursor X delta value in rectangular coordinates.
Group Cursor
Syntax CURSor:XY:RECTangular:X:DELta?
CURSor:XY:RECTangular:X:POSITION<x>
Sets or returns the X rectangular coordinate for cursor 1 or cursor 2. The cursor is
specifiedbyxandcanbeeither1or2.
MSO4000 and DPO4000 Series Programmer Manual 2-143