Commands Listed in Alphabetical Order
POWer:RIPPle:RESults:MEAN? (Query Only)Returns the mean of the peak-to-peak ripple measurements.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:RIPPle:RESults:MEAN?
Examples POWER:RIPPLE:RESULTS:MEAN? might return
:POWER:RIPPLE:RESULTS:MEAN 1.0 indicating that the mean peak-to-peak
amplitude is set to 1.0 V.
POWer:RIPPle:RESults:MIN? (Query Only)Returns the minimum of the peak-to-peak ripple measurement.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:RIPPle:RESults:MIN?
Examples POWER:RIPPLE:RESULTS:MIN? might return :POWER:RIPPLE:RESULTS:MIN
0.9 indicating that the minimum peak-to-peak amplitude is set to 0.9 V.
POWer:RIPPle:RESults:STDdev? (Query Only)Returns the standard deviation of the peak-to-peak ripple measurements.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:RIPPle:RESults:STDdev?
2-286 MSO4000 and DPO4000 Series Programmer Manual