Commands Listed in Alphabetical Order
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:DISplay:IRMS {OFF|ON|0|1}
POWer:QUALity:DISplay:IRMS?
Arguments OFF or 0 turns off the rms current display.
ON or 1 turns on the rms current display.
Examples POWER:QUALITY:DISPLAY:IRMS 1 turns on the rms current display.
POWER:QUALITY:DISPLAY:IRMS? might return
:POWER:QUALITY:DISPLAY:IRMS 0 indicating that the rms current display
is off.
POWer:QUALity:DISplay:PHASEangle
Sets or returns the display state for the phase angle readout.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:DISplay:PHASEangle {OFF|ON|0|1}
POWer:QUALity:DISplay:PHASEangle?
Arguments OFF or 0 turns off the phase angle display.
ON or 1 turns on the phase angle display.
Examples POWER:QUALITY:DISPLAY:PHASEANGLE 1 turns on the phase angle display.
POWER:QUALITY:DISPLAY:PHASEANGLE? might return
:POWER:QUALITY:DISPLAY:PHASEANGLE 0 indicating that the
phase angle display is off.
POWer:QUALity:DISplay:POWERFACtor
Sets or returns the display state forthepowerfactorreadout.
MSO4000 and DPO4000 Series Programmer Manual 2-273