Commands Listed in Alphabetical Order
is not displayed, the query form generates an error and returns event code 2244.
This command is for compatibility with other Tektronixoscilloscopes.
Group Waveform Transfer
Syntax WFMOutpre:FRACTional?
Related Commands DATa:SOUrce
Arguments Arguments are ignored.
WFMOutpre:NR_Pt? (Query Only)
Returns the number of points for the DATa:SOUrce waveform that will be
transmitted in response to a CURVe? query. The query command will time
out and an error will be generated if the waveform specied by DATa:SOUrce
is not turned on.
Group Waveform Transfer
Syntax WFMOutpre:NR_Pt?
Related Commands CURVe,DATa,DATa:STARt,DATa:STOP,SAVe:WAVEform,
SAVe:WAVEform:FILEFormat,WFMInpre:NR_Pt
Examples WFMOUTPRE:NR_PT? might return :WFMOUTPRE:NR_PT 10000 indicating that
there are 10000 data points to be sent.
WFMOutpre:PT_Fmt? (Query Only)
Returns the point format for theoutgoing waveform specied by the DATa:SOUrce
command. Returned values are either ENV, which indicates envelope mode
format in which the data is returned as a series of min/max pairs, or Y,which
indicates normal waveform points. The query command will time out and an error
will be generated if the waveform specied by DATa:SOUrceis not turned on.
Group Waveform Transfer
MSO4000 and DPO4000 Series Programmer Manual 2-491