Commands Listed in Alphabetical Order
:SAVe:WAVEform:FILEFormat INTERNal; :SAVe:WAVEform ALL,
"D:/test_folder/test1" saves all displayed waveforms (excluding serial
bus waveforms and digital channels for MSO models) to individual les named
D:/test_folder/test1_<wfm>.isf (for example test1_CH1.isf).
SAVe:WAVEform:FILEFormat
Species or returns the le format for saved waveforms. Waveform header and
timing information is included in the resulting le of non-internal formats.
The oscilloscope saves DPO waveforms as a 500 x 200 matrix, with the rst
row corresponding to the most recently acquired data. The values specied by
DATa:STARt and DATa:STOP determine the range of waveform data to output.
In the event that DATa:STOP value is greater than the current record length, the
current record length determines the last output value.
Group Save and Recall
Syntax SAVe:WAVEform:FILEFormat {INTERNal|SPREADSheet}
SAVe:WAVEform:FILEFormat?
Related Commands CURVe,DATa,DATa:STARt,DATa:STOP,SAVe:WAVEform,
WFMInpre:NR_Pt,WFMOutpre:NR_Pt?
Arguments INTERNal species that waveforms are saved in an internal format, using a .isf
lename extension. These les can be recalled as reference waveforms. When this
argument is specied, the settings specied via the DATa:STARt and DATa:STOP
commands have no meaning as the entire waveform is saved.
SPREADSheet species that waveform data is saved in a format that contains
comma delimited values. These waveform data les are named using the .csv
lename extension. Saving waveforms in CSV format enables sprea dsheet
programs to import the data.
Examples SAVE:WAVEFORM:FILEFORMAT INTERNAL species that the internal le format
is the format used for saving waveforms.
SAVE:WAVEFORM:FILEFORMAT? might return :SAVE:WAVEFORM:FILEFORMAT
INTERNAL indicating that waveforms are saved using the internal format.
SAVe:WAVEform:GATIng
Species whether save waveform operations should save the entire waveform
(NONe) or a specied portion of the waveform.
2-328 MSO4000 and DPO4000 Series Programmer Manual