Commands Listed in Alphabetical Order
Group Power
Syntax POWer:QUALity:DISplay:FREQuency {OFF|ON|0|1}
POWer:QUALity:DISplay:FREQuency?
Arguments OFF or 0 turns off the frequency display.
ON or 1 turns on the frequency display.
Examples POWER:QUALITY:DISPLAY:FREQUENCY 1 turns on the frequency readout
display.
POWER:QUALITY:DISPLAY:FREQUENCY? might return
:POWER:QUALITY:DISPLAY:FREQUENCY 0 indicating that the
frequency readout display is off.
POWer:QUALity:DISplay:ICRESTfactor
Sets or returns the display state for the current crest factor readout.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:DISplay:ICRESTfactor {OFF|ON|0|1}
POWer:QUALity:DISplay:ICRESTfactor?
Arguments OFF or 0 turns off the current crest factor display.
ON or 1 turns on the current crest factor display.
Examples POWER:QUALITY:DISPLAY:ICRESTFACTOR 1 turns on the current crest factor
display.
POWER:QUALITY:DISPLAY:ICRESTFACTOR? might return
:POWER:QUALITY:DISPLAY:ICRESTFACTOR 0 indicating that the
current crest factor display is off.
POWer:QUALity:DISplay:IRMS
Sets or returns the display state for the rms current readout.
2-272 MSO4000 and DPO4000 Series Programmer Manual