Tektronix DPO4000, MSO4000 CH<x>:PRObe? (Query Only), CH<x>:PRObe:AUTOZero (No Query Form), CH<x>:PRObe:COMMAND (No Query Form)

Commands Listed in Alphabetical Order
Syntax CH<x>:POSition <NR3>
CH<x>:POSition?
Related Commands CH<x>:OFFSet,REF<x>:VERTical:POSition,MATH[1]:VERTical:POSition
Arguments <NR3> is the position value for channel <x>, in divisions, from the center
graticule. The range is 8 to -8 divisions.
Examples CH2:POSition 1.3 positions the Channel 2 input signal 1.3 divisions above the
center graticule.
CH1:POSition? might return :CH1:POSITION -1.3000 indicating that the
current position of Channel 1 is 1.3 divisions below the center graticule.
CH<x>:PRObe? (Query Only)
Returns all information concerning the probe attached to channel <x>, where x
is the channel number.
Group Vertical
Syntax CH<x>:PRObe?
CH<x>:PRObe:AUTOZero (No Query Form)
Sets the TekVPI probe attached to channel <x> to zero, where x is the channel
number
Group Vertical
Syntax CH<x>:PRObe:AUTOZero EXECute
Arguments Execute auto zeros the probe.
CH<x>:PRObe:COMMAND (No Query Form)
Sets the state of the probe control specified with the first argument to the state
specified with the second argument. The commands and states are unique to the
MSO4000 and DPO4000 Series Programmer Manual 2-123