Tektronix DPO4000, MSO4000 MSO4000 and DPO4000 Series Programmer Manual 2-55

Command Groups
Table 2-31: Trigger Commands (cont.)
Command Description
TRIGger:A:RUNT? Returns the current A
runt pulse trigger logic
parameters
TRIGger:A:RUNT:POLarity Setsor returns the polarity
for the A pulse runt trigger
TRIGger:A:RUNT:SOUrce Sets or returns the source
for the A pulse trigger
TRIGger:A:RUNT:WHEn Sets or returns the type
of pulse width the trigger
checks for when it uncovers
a runt
TRIGger:A:RUNT:WIDth Setsor returns the minimum
width for A pulse runt trigger
TRIGger:A:SETHold? Returns settings for setup
and hold violation triggering
TRIGger:A:SETHold:CLOCk? Returns clock edge polarity,
voltage threshold and source
inputfor setup/hold triggering
TRIGger:A:SETHold:CLOCk:EDGE Sets or returns the clock
edge polarity for setup and
hold triggering
TRIGger:A:SETHold:CLOCk:SOUrce Sets or returns the clock
source for the A logic trigger
setup and hold input
TRIGger:A:SETHold:CLOCk:THReshold Sets or returns the clock
voltage threshold for setup
and hold trigger
TRIGger:A:SETHold:DATa? Returns the voltage
threshold and data source
for the setup/hold trigger
TRIGger:A:SETHold:DATa:SOUrce Setsor returns the data
sourcefor the setup and hold
trigger
TRIGger:A:SETHold:DATa:THReshold Setsor returns the data
voltage threshold for setup
and hold trigger
TRIGger:A:SETHold:HOLDTime Sets or returns the hold
time for the setup and hold
violation triggering
TRIGger:A:SETHold:SETTime Sets or returns the setup
time for setup and hold
violation triggering
TRIGger:A:SETHold:THReshold:CH<x> Sets or queries the threshold
for the channel
MSO4000 and DPO4000 Series Programmer Manual 2-55