Tektronix DPO4000, MSO4000 *RCL (No Query Form), RECAll:SETUp (No Query Form)

Commands Listed in Alphabetical Order
*RCL (No Query Form)
This command restores the state of the oscilloscope from a copy of the settings
stored in memory (The settings are stored using the *SAVcommand).
Group Save and Recall
Syntax *RCL <NR1>
Related Commands FACt ory ,*LRN?,RECAll:SETUp,*RST,*SAV,SAVe:SETUp
Arguments <NR1> is a value in the range from 1 to 10, which specifies a saved setup storage
location.
Examples *RCL 3 restores the oscilloscope from a copy of the settings stored in memory
location 3.
RECAll:SETUp (No Query Form)
Restores the state of the oscilloscope from a copy of the settings stored in memory.
The settings are stored using the *SAV command.
Group Save and Recall
Syntax RECAll:SETUp {FACtory|<NR1>|<file path>}
Related Commands FACt ory ,*RCL,*RST,*SAV,SAVe:SETUp,FILESystem:CWD
Arguments FACtory restores the factory setup.
<NR1> is a value in the range from 1 to 10, which specifies a saved setup storage
location.
<file path> specifies a location for an oscilloscope setup file. <file path> is
a quoted string that defines the file name and path. Input the file path using the
form <drive>:/<dir>/<filename>.<extension> and one or <dir>s are
optional. If you do not specify them, the oscilloscope will read the file from the
default directory (see FILESystem:CWD). <filename> stands for a filename; the
use of wildcard characters in filenames is not supported. Filename extensions are
not required, but highly recommended.
MSO4000 and DPO4000 Series Programmer Manual 2-317