Commands Listed in Alphabetical Order
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:HIVALUE? might return
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:HIVALUE "XXXXXX" indicating
the cycle count high value is don’t care.
TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier
Sets or returns the FLEXRAYcycle count qualifier.
Group Trigger
Syntax TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier
{LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|
INrange|OUTrange}
TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier?
Arguments LESSThan sets the FLEXRAY cycle count qualifierto less than.
MOREThan sets the FLEXRAY cycle count qualifier to more than.
EQUal sets the FLEXRAY cycle count qualifier to equal.
UNEQual sets the FLEXRAY cyclecount qualifier to not e qual.
LESSEQual sets the FLEXRAY cycle countqualifier to less than or equal.
MOREEQual sets the FLEXRAYcycle count qualifier to gr eater than or equal.
INrange sets the FLEXRAYc ycle count qualifierto in range.
OUTrange sets the FLEXRAY cycle countqualifier toout of range.
Examples TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:QUALIFIER LESSTHAN sets the
cycle count qualifier to LESSTHAN.
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:QUALIFIER? might return
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:QUALIFIER EQUAL indicating
that the cycle count qualifier is set to EQUAL.
TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue
Sets or returns the binary data string to be used for FLEXRAYcycle count low
value.
Group Trigger
MSO4000 and DPO4000 Series Programmer Manual 2-403