Command Groups
Table 2-19: Ethernet Commands (cont.)
Command Description
ETHERnet:GATEWay:IPADDress Setsor returns the remote interface gateway
IP address
ETHERnet:HTTPPort Sets or returns the remote interface HTTP
port value
ETHERnet:IPADDress Sets or returns the IP address assigned to
the oscilloscope
ETHERnet:NAME Sets or returns the network name assigned
to the oscilloscope
ETHERnet:PASSWord Setsor returns the Ethernet access password
ETHERnet:PING Causes the oscilloscope to ping the gateway
IP address
ETHERnet:PING:STATUS? Returnsthe results from pinging the gateway
IP address
ETHERnet:SUBNETMask Sets or returns the remote interface subnet
mask value
File System Command Group
Use the commands in the File System Command Group to help you use
CompactFlash and USB media. You can use the commands to do the following:
List the contents of a directory
Create and delete directories
Create, read, rename, or delete a file
Format media
When using these commands, keep the following points in mind:
File arguments are always enclosed within double quotes:
"D:/MYDIR/TEK00001.SET"
File names follow the non-case sensitive, MSDOS format:
[DRIVE:][\PATH\]filename
Path separators may be either forwardslashes(/)orbackslashes(\)
MSO4000 and DPO4000 Series Programmer Manual 2-21