Commands Listed in Alphabetical Order
Examples POWER:QUALITY:VRMS? might return :POWER:QUALITY:VRMS 115 indicating
that the rms voltage value is set to 115 V.
POWer:REFLevel:ABSolute (No Query Form)
Sets the reference levels to their default unit values.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:REFLevel:ABSolute {SETTODEFaults}
Arguments SETTODEFaults sets the reference levels to their default values.
POWer:REFLevel:ABSolute:HIGH
Sets or returns the top reference level for power measurements.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:REFLevel:ABSolute:HIGH <NR3>; Ranges={D,-1e6,+1E6}
POWer:REFLevel:ABSolute:HIGH?
Arguments <NR3> is the absolute high value in volts. Default value is 0.0E+0
Examples POWER:REFLEVEL:ABSOLUTE:HIGH 2 sets the absolute high value to 2.000.
POWER:REFLEVEL:ABSOLUTE:HIGH? might return
POWER:REFLEVEL:ABSOLUTE:HIGH 2 indicating that the absolute high
valueissetto2V.
POWer:REFLevel:ABSolute:LOW
Sets or returns the low reference level for power measurements.
2-280 MSO4000 and DPO4000 Series Programmer Manual